Other Tools (i.e.) Tools Less Well Known to the General Populace...

Some tools just don't fit in normal places!

	J.C. Smith Enterprises – J.C. Smith lives and works in deepest, darkest Ohio and makes the only known 1/32" 'Z' bender - perfect for z bending 1/32" wire commonly seen on electrics and foamies. But wait, there's more! Have a look! PRODUCT LISTING >>
	Strictly R/C Tools! – Okay, we've been asked many, many times for these tools! As they cannot really be used for anything else, they fall in our 'Strictly R/C Tools Category.' Following standard RJRCoolTools.com practice, they are the best tools in the business and come highly recommended. You'll know the brands, and no shipping charges apply! PRODUCT LISTING >>
	Model Train Tools – We're still learning about this category - but our initial foray has generated results where flush cutters for track are concerned. Medium Duty and Light Duty cutters are listed here! PRODUCT LISTING >>
	Screw Chek'R by Ruelle Industries – We found the perfect screw thread checkers! After fiddling with plastic gages for years trying to figure out which screw we had, we knew there must be someone out there with a real gage that would be a professional tool and be precise enough to take the abuse of inserting lots of screws over and over! Ruelle Industries was the answer. Based in Waterford, MI, we have these in stock and are ready to ship! Each gage comes with complete instructions for checking diameter and pitch! PRODUCT LISTING >>
	Sight Magnifiers – Sight Magnifiers brought these very fine Binocular Magnifiers to our attention. We put them on the web immediately, they are of excellent quality and a really good value. Two designs are listed here, the "Sight Booster" and the "Lite-Site." Both have adjustable headbands and are very comfortable. Optical quality acrylic lenses with an abrasion resistant hard coating swing out of the way when not in use. The main difference between the designs can be summed up thusly. The "Sight Booster" is a more traditional design, what most users are familiar with and is good at blocking light from above that may interfere with one's view of the workpiece. The "Lite-Site" is more open - subject to ambient light - but the user can look over or under the lens as necessary, making the unit much more flexible. Then there's that claustrophobia thing with the "Sight Booster"... But we won't go there... As an added note; these units now come with 3 lens plates each with ah different magnification and focal point. For soldering work, the #3 is excellent. For threading needles? You guessed it, the #7 is just right! PRODUCT LISTING >>
	Special Sets & Special Shipping Charges – This section is intended for billing for Specially Made-Up Sets & special shipping charges to destinations other than the continental United States. Per emailed directions, find the appropriate charge and use your credit card or paypal to 'buy' shipping charges! PRODUCT LISTING >>